From the pages of   jetZILLA TM - April/May 2003 -
This is the 3-inch pipe engine
mentioned above. The valve plate
shown in this month's cover photo
and in the photos below are from
the front end of this engine, and
can be seen from the valve side at
the center of this shot. The reddish
object is the valve head of the
DynaJet, shown here for scale.
Photo Copyright 2003 Mark 'Thixis'
3-inch plumbing pipe engine (c) 2003 Mark 'Thixis'

Page updated: 07 May 2003

Copyright 2003 Cottrill Cyclodyne Corporation
- All rights reserved -